NEWS


RCCBs Ex9L F type (Ex9L-H)

RCCBs Ex9L F type (Ex9L-H) are suitable for domestic as well as industrial applications. They are based on permanent magnet principle. It brings the advantage of voltage independent function. F type provides a sensitivity to residual AC, pulsating DC current and detection of high frequency currents up to 1 kHz. Adequate voltage is only necessary when testing the RCCB with the test button. Magnetic RCCBs should be tested regularly. On this testing period local law or regulations may apply. It is advised to test every month in harsh conditions and every six months in a fair setting.

  • Residual Current Circuit Breakers according to EN 61008-1 & EN 62423
  • Cond. rated short circuit strength Inc 10 kA
  • 2 and 4-pole versions
  • Rated residual current 30, 100 and 300 mA
  • Rated current up to 63 A
  • Rated operatting voltage 240/415 V AC
  • F type
  • Indication of electrical tripping
  • Suitable for applications from -25 to +40 °C


MCCBs Ex9ML

Ex9ML The primary use for electronic RCD modules for the Ex9M series is in power distribution. It was developed to provide the moulded case circuit breaker, it is mounted on, an extra layer of residual current protection. This series is appropriate for a wide range of applications because of its significant variety of adjustable settings, compatibility with electronic and thermomagnetic circuit breakers, and testing conducted in accordance with IEC / EN 60947-2 standards, which guarantee the device's functionality and reliability.

  • Voltage dependent Residual Current Device
  • Tested according IEC / EN 60947-2
  • Up to frame size Ex9M3
  • 3 and 4-pole versions
  • AC and A sensibility type
  • Adjustable leakage current range
  • Adjustable time delay
  • Electronic and TM MCCBs compatible


MOTOR OPERATOR MOD31

MOD31 is an accessory which provides the function to control MCBs remotely. The motor operator allows the circuit breaker to be opened, closed or automatically reset remotely. Two lengths of toggle cover all pole sizes of Ex9B devices.

Additional functions: Auto reclose: The MOD31 offers a practical way to restore power following a fault event by automatically attempting to flip the circuit breaker back to the ON position when it trips. Open / close status: An auxiliary contact (1NO) built inside the motor operator enables remote monitoring of the circuit breaker's open or closed state.

  • Motor operator for Ex9B devices (Ex9BH, Ex9BN. Ex9BS, Ex9PN, Ex9BI)
  • Two toggle lengths 18 mm (1 pole) and 36 mm (2-4 pole)
  • Auto reclose function
  • Open / Close status (1 NO contact)
  • 230V AC or 48V DC
  • According to EN 60947-5-1:2017

PORTFOLIO EXTENSION


CYLINDRICAL FUSE SWITCH DISCONNECTORS Ex9FS

Cylindrical Fuse Switch Disconnectors Ex9FS for rated currents up to 63 A. Thanks to utilization categories AC-21B at 500 V AC and AC-22B at 400 V AC they can be used for switching under load. Very compact design with DIN rail mounting allows its usage in various applications. Fuse links of types gG and aM can be used with respect to maximum allowed power loss.

  • Meet requirements of EN 60947-3
  • Rated operating voltage 400/500 V AC
  • Versions with rated current
    • 32 A (10 x 38 mm)
    • 50 and 63 A (14 x 51 mm)
    • 100 A (22 x 58 mm)
  • Utilization categories AC-21B at 500 V AC and AC-22B at 400 V AC
  • Sealing possibility


CYLINDRICAL FUSE HOLDERS Ex9F

Cylindrical Fuse Holders Ex9F for rated currents up to 63 A. Thanks to utilization category AC-20B at 400/690 V AC they cannot be used for switching under load. Very compact design with DIN rail mounting allows its usage in various applications. Fuse links of types gG and aM can be used with respect to maximum allowed power loss.

  • Meet requirements of EN 60947-3
  • Rated operating voltage 400/690 V AC
  • Versions with rated current
    • 32 A (10 x 38 mm)
    • 50 and 63 A (14 x 51 mm)
    • 100 A (22 x 58 mm)
  • Utilization category AC-20B at 400/690 V AC
  • Sealing possibility


MOUNTING PLATE

Mounting plate

  • Made of plastic
  • Height 110 mm
  • One mounting plate per row
  • Extension for enclosures: PMF-MM and PMF-C
  • Original mounting plates are still available