EAN: 8592765033697
The Ex9UE2 line is a group of Class II Surge Protective Devices. They are intended as a protection against transient overvoltage caused by fast switching operations or indirect hits of lightning strokes (residuum effects). It is recommended to install Class II SPDs every 10 – 20 meters of cable length repetitively, typically to main and sub distribution boards. The Ex9UE2 20 440 are designed for direct coordination with Class I SPDs ofline Ex9UE1 35. In case of Ex9UE2 20 275, the coordination with the line Ex9UE1 35 is done by means of 10 m cable length. The design of Ex9UE2 is based on Metal Oxide Varistors. Such design provides very low response time. The modular design with plug in inserts allows simple and quick replacement of function modules in case of MOV is beyond if its lifespan due to often occurrence of overvoltage peaks.
Paremeter | Value |
---|---|
Short-circuit-proof | YES |
Construction size | 4 modular spacing |
Width in number of modular spacings | 4 |
Max. continuous voltage AC | 440 |
Voltage protection level L-N | 2.2 |
Degree of protection (IP) | IP20 |
Voltage protection level N-PE | 1.5 |
Category type 2 | YES |
Integrated backup fuse | NO |
Mounting method | DIN rail (top hat rail) 35 mm |
System configuration | TN-S, TT |
Type of poles | 3+N/PE |
Nominal voltage AC | 440 |
Max. conductor cross section flexible (fine-strand) | 35 |
With remote signalling contact | YES |
Signalling at the device | Optic |
Nominal discharge surge current (8/20) | 20 |
Max. conductor cross section solid (solid, stranded) | 35 |
Document Type | Document Name | Size | Format |
---|---|---|---|
Mounting instruction Ex9UE2 | 1.4mb | ||
Declarations of Conformity Ex9UE2 | 0.5mb | ||
Datasheet Ex9UE2 | 1.1mb | ||
Catalogue Installation Devices | 0.0gb | PDF WEB |